DrTiki.com

Front Fender De-Badge

I ordered and received the Harley Front Fender “Name Plates” though they aren’t actually name plates. There were needed to de-badge the front fender. The “Limited” logo on the front fender is held on with 3M Double Sided Tape, but it is aligned using three holes on each side of the fender. The de-badge process is the same just heat up the area with a hair dryer of heat gun and run a fishing line or dental floss behind the emblem to remove it. Once removed you can use 3M Adhesive rover or in my case, Goo Gone to remove any access tape residue.

Before:

After:

During:

%d bloggers like this: